Journal of Materials and Engineering Structures
Volume 4, Numéro 1, Pages 3-10
2017-03-31
Pilot Experimental Tests On Punching Shear Strength Of Flat Plates Reinforced With Stirrups Punching Shear Reinforcement
Authors : Hassan Mohamed . Abdel Rahman Ahmed . Sherif Alaa . Osman Mostafa . Ahmed Asmaa .
Abstract
Flat plates are favor structure systems usually used in parking garages and high-rise buildings due to its simplicity for construction. However, flat plates have some inherent structural problems, due to high shear stress surrounding the supporting columns which cause a catastrophic brittle type of failure called "Punching Shear Failure". Several solutions are used to avoid punching shear failure, including the use of drop panels or punching shear reinforcement. The latter is being a more sophisticated solution from the structural ductility, the architectural and the economical point of view. This study aims at investigating the effect of stirrups as shear reinforcement in enhancing the punching strength of interior slab-column connections. A total of four full-scale interior slab-column connections were tested up to failure. All slabs had a side length of 1700 mm and 160 mm thickness with 200 mm x 200 mm square column. The test parameters were the presence of shear reinforcement and stirrups concentration around the supporting column. The test results showed that the distribution of stirrups over the critical punching shear zone was an efficient solution to enhance not only the punching shear capacity but also the ductility of the connection. Furthermore, the concentrating of stirrups shear reinforcement in the vicinity of the column for the tested slabs increases the punching shear capacity by 13 % compared to the uniform distribution at same amount of shear reinforcement.
Keywords
Flat Plate, Punching Shear, Shear Reinforcement, Parking Garages
Les articles similaires
Riyad Y.
.
Kissi B.
.
Mrani I.
.
Parron M.a.
.
Dolores R.c.m.
.
pages 181-195.
Rouaz Idriss
.
Bourahla Nouredine
.
Kechidi Smail
.
pages 399-417.
Mohammed Ali Taghreed Kh.
.
pages 203-214.
Bouazza Mokhtar
.
Adda-bedia E.a
.
pages 157-161.
Gunjal Sachin M.
.
Hajare Rajesh B.
.
Sayyad Atteshamuddin S.
.
Ghodle Manas D.
.
pages 159-167.
