Revue des Sciences Fondamentales Appliquées
Volume 9, Numéro 2, Pages 847-860
2017-05-01
Authors : Ahmad T. . Malik A. N. . Raza S. S. . Kamran M. . Manzoor M. U. . Salman A. . Hussain F. . Riaz F. . Ahmad R. . Akhtar M. N. .
A Cu based shape memory alloy (Cu-Al-Ni) having a composition 83% Cu, 14% Al, 3% Ni, was developed and studied to determine the shape memory effect. Powder of Cu, Al and Ni was melted in a pit furnace at about 15500C, and casted alloy was heat treated at 8500C for a period of 50 minutes followed by water quenching. Microstructure characterization of alloy (Cu-Al-Ni) was carried out to determine the pre-quenched (cast structure) and quenched martensitic structure. The microstructure analysis of developed samples showed needle like structure of quenched martensite after heat treatment. It has a very good resemblance with structure of casted shape memory alloy obtained from the vacuum induction process. The Vickers hardness test was also performed. Quenched microstructure with improved hardness than pre-quenched structure was observed.
Shape Memory Alloy, Microstructure, Mechanical Properties.
Seyed Mojtaba Mousavi
.
pages 13-26.
Hana Ferkous
.
pages 36-43.
Djebablia Ikram
.
Guellati Ouanassa
.
Habib Naima
.
Harat Aicha
.
Djefaflia Fahima
.
Nait-merzoug Assia
.
Janowska Izabella
.
Guerioune Mohamed
.
pages 27-34.
Damene Z.
.
Goual M. S.
.
Saiti I.
.
Benhassine N.
.
Ferhat A.
.
pages 220-228.
Meziane O.
.
Bensedira A.
.
Guessoum M.
.
Haddaoui N.
.
pages 494-509.