Communication science et technologie
Volume 12, Numéro 1, Pages 85-96
2014-01-01
Auteurs : Hana Fadda .
Abstract —: This study provides an approach for determining circumferential residual strains and mechanical properties in a high-density polyethylene pipe. The method is based on the preparation of cylindrical envelopes of specific dimensions by machining and the measurement of the obtained deformations as a function of time, after cutting the rings in the longitudinal direction. In order to identify the impact of these residual strains, tensile tests are performed on standard specimens extracted from the pipe wall in L and T directions. The results indicate an evolution of displacements caused by the liberation of internal residual stresses. The calculated stresses are highly compressive on external layers. The mechanical properties measured on the internal layers are largely higher than those of external layers which indicates a difference in morphologies between outer and inner pipe layers imparted by the extrusion process.
HDPE-100/ Pipe/ Machining/ Residual strain/ Residual stress/ Mechanical properties/ L and T directions/
Kiass N
.
Chaoui K
.
pages 79-85.
Kiass N.
.
Chaoui K.
.
pages 25-32.
Benlatreche Y
.
Chekour L
.
Rahil I
.
Djarri A
.
pages 13-18.
Benlatreche Y
.
Chekour L
.
Rahil I
.
Djarri A
.
pages 91-96.
Mbah Jean Bernard
.
pages 182-204.